Hướng dẫn sử dụng nhiệt kế và ẩm kế kỹ thuật số trong nhà ThermoPro TP50

1. Giới thiệu

The ThermoPro TP50 is a compact and highly accurate digital indoor thermometer and hygrometer designed to help you monitor the temperature and humidity levels in your living spaces. This device provides essential information for maintaining a comfortable and healthy indoor environment, displaying current conditions, maximum and minimum records, and a comfort level indicator.

Its versatile design allows for easy placement in various locations, making it suitable for homes, offices, baby rooms, greenhouses, and more. Understanding the information provided by the TP50 can assist in managing conditions for personal comfort, plant care, and pet well-being.

2. Tính năng sản phẩm

• Thiết kế nhỏ gọn: Approximately 8.0 cm (height) x 7.0 cm (width) x 2.2 cm (depth). Made from durable ABS resin.
• Màn hình lớn, rõ ràng: Features a large LCD screen with clear digits for easy readability of current temperature and humidity.
• Bản ghi Max/Min: Automatically records and displays the highest and lowest temperature and humidity values measured since the last reset. This feature is useful for tracking environmental changes over time.
• Chỉ báo mức độ thoải mái: Utilizes a simple face icon to indicate one of three comfort levels: Dry, Comfort, or Uncomfortable, based on the current temperature and humidity.
• Vị trí linh hoạt: Equipped with a strong magnet for attachment to metallic surfaces like refrigerators, and a foldable stand for tabletop use.
• Độ chính xác cao: Provides precise measurements for effective environmental monitoring.

3. Thiết lập

3.1 Lắp đặt pin

1. Xác định vị trí ngăn chứa pin ở mặt sau của thiết bị.
2. Mở nắp ngăn chứa pin.
3. Insert one (1) AAA 1.5V battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Đóng chặt nắp ngăn chứa pin.

3.2 Initial Stabilization

Upon initial power-on or after battery replacement, the sensor requires time to stabilize and accurately reflect the surrounding environment. Due to the small air intake hole on the back of the unit, it may take approximately 30 minutes for the device to display stable and accurate readings. Please allow this period for the device to calibrate before relying on the measurements.

4. Hướng dẫn vận hành

4.1 Đọc màn hình

Màn hình LCD lớn hiển thị các thông tin sau:

• Độ ẩm hiện tại: Hiển thị dưới dạng phần trămtage (%) at the top of the display.
• Nhiệt độ hiện tại: Shown in degrees Celsius (°C) or Fahrenheit (°F) in the middle of the display.
• Độ ẩm tối đa/tối thiểu: The highest and lowest humidity recorded since the last reset are displayed below the current humidity.
• Nhiệt độ tối đa / tối thiểu: The highest and lowest temperature recorded since the last reset are displayed below the current temperature.
• Comfort Level Icon: A face icon (Dry, Comfort, Uncomfortable) is displayed next to the current humidity reading.

4.2 Chuyển đổi đơn vị nhiệt độ (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), locate the '°F/°C' button on the back of the unit and press it. The display will instantly change the temperature unit.

4.3 Resetting Max/Min Records

The maximum and minimum temperature and humidity records are automatically updated every 10 seconds. To clear the recorded maximum and minimum values and start a new recording cycle, press and hold the 'CLEAR' button located on the back of the unit for approximately 3 seconds. The display will show the current readings as the new starting point for max/min tracking.

5. Bảo trì

5.1 Vệ sinh

Để vệ sinh thiết bị, hãy lau bằng khăn mềm.amp cloth. Do not use abrasive cleaners or immerse the unit in water. Ensure the device is dry before re-using.

5.2 Thay thế pin

When the display becomes dim or shows inaccurate readings, it may be time to replace the battery. Follow the battery installation steps in Section 3.1 to replace the AAA battery.

5.3 Lưu trữ

If storing the unit for an extended period, remove the battery to prevent leakage and damage to the device.

5.4 Important Note on Water Resistance

Thiết bị này là KHÔNG thấm nước. Please avoid using it in wet environments such as bathrooms, washrooms, or near sinks, as exposure to water can damage the unit.

KHAI THÁC. Xử lý sự cố

6.1 Đọc không chính xác

• Thiết lập ban đầu: As mentioned in Section 3.2, allow 30 minutes for the device to stabilize after initial setup or battery replacement.
• Vị trí: Ensure the device is placed in a location with good air circulation, away from direct sunlight, heat sources, or drafts, which can affect readings.
• Sự cản trở: The small air intake hole on the back should not be obstructed.

6.2 Màn hình mờ hoặc tối

• Kiểm tra pin: The battery may be low or depleted. Replace the AAA battery with a new one.
• Lắp đặt pin: Ensure the battery is installed correctly with the proper polarity.

7. Thông số kỹ thuật

8. Bảo hành và Hỗ trợ

ThermoPro products are designed for reliability and performance. This product comes with a 1-year warranty from the date of purchase, covering defects in materials and workmanship under normal use.

For technical assistance, troubleshooting, or warranty claims, please contact ThermoPro customer support. Our friendly customer support team is available to assist you with any questions or concerns regarding your device.

ThermoPro is committed to providing high-quality products and support to its community of over 20 million users worldwide.

For more information and support, please visit the official ThermoPro brand store: Cửa hàng thương hiệu ThermoPro