Godox X2T-S TTL Wireless Flash Trigger Transmitter for Sony Cameras User Manual

Giới thiệu

The Godox X2T-S is a TTL wireless flash trigger transmitter designed for Sony cameras, featuring 2.4G wireless transmission and Bluetooth connectivity. It supports a range of advanced flash functions including TTL autoflash, 1/8000s high-speed sync, multiflash mode, and manual mode. This manual provides detailed instructions for setting up, operating, and maintaining your X2T-S transmitter.

Figure 1: Godox X2T-S Wireless Flash Trigger Transmitter, showing the top and front controls.

Cài đặt

1. Installing on Camera

1. Ensure your camera and the X2T-S transmitter are powered off.
2. Slide the X2T-S hotshoe onto your camera's hotshoe mount.
3. Secure the transmitter by rotating the hotshoe locking mechanism until it is firmly attached.
4. Power on the X2T-S transmitter and your camera.

Figure 2: The X2T-S transmitter mounted securely on a Sony camera's hotshoe.

2. Bật / Tắt nguồn

Locate the power switch on the side of the unit. Slide it to the "ON" position to power on the transmitter. Slide it to "OFF" to power off.

Hình 3: Mặt bên view of the X2T-S, highlighting the power switch and other controls.

3. Bluetooth Connection (GodoxPhoto App)

1. Download the "GodoxPhoto" app from your mobile device's app store (compatible with iPhone/Android phones or iPad/Android tablets).
2. Bật Bluetooth trên thiết bị di động của bạn.
3. On the X2T-S, press and hold the THỰC ĐƠN button to enter the menu, then navigate to the Bluetooth settings and ensure it is enabled.
4. Open the GodoxPhoto app and follow the on-screen instructions to connect to your X2T-S transmitter.
5. Once connected, you can control flash mode, power output, modeling light mode, and other settings directly from the app.

Hướng dẫn sử dụng

1. Điều khiển và hiển thị cơ bản

The X2T-S features an LCD screen for clear display of settings, along with 5 group setting buttons (A, B, C, D, E) and 3 function buttons (MODE, MENU, SET, ALL) for quick adjustments. The control wheel allows for easy value changes.

Hình 4: Cận cảnh view of the X2T-S LCD display and control buttons.

2. Wireless X System (2.4G)

The built-in Godox 2.4G Wireless X System provides a reliable operating distance of up to 100 meters. To avoid signal interference, ensure the channels and wireless IDs of the master (X2T-S) and slave units (Godox flashes) are set to the same values.

• Nhóm: The X2T-S supports 5 groups (A, B, C, D, E) for controlling multiple flash units independently.
• Kênh: 32 channels are available to prevent interference.
• ID không dây: Access to 99 wireless ID settings further limits interference from other systems.

3. Chế độ và chức năng đèn flash

• Đèn flash tự động TTL: Tự động điều chỉnh công suất đèn flash để có độ phơi sáng chính xác.
• Chế độ thủ công: Cho phép kiểm soát chính xác công suất đèn flash.
• Multi-flash Mode: Bắn một loạt tia sáng nhanh để tạo hiệu ứng sáng tạo.
• Đồng bộ tốc độ cao (HSS): Cho phép đồng bộ đèn flash ở tốc độ màn trập lên tới 1/8000 giây.
• Bù trừ phơi sáng đèn flash (FEC): Adjusts flash output relative to the camera's metered exposure.
• Chức năng của TCM: Converts TTL flash values into manual power output values, allowing for quick transitions between automatic and manual control.
• Mô hình hóa Lamp Điều khiển: Điều chỉnh mô hình lamp settings of compatible Godox flashes.
• AF Assist Light: The X2T-S features an AF assist light that uses visible light to aid camera autofocus in low-light conditions.

BẢO TRÌ

• Giữ thiết bị khô ráo. Không sử dụng khi tay ướt hoặc nhúng vào nước.
• Avoid sudden temperature changes, as this can cause condensation.
• Lau sạch thiết bị bằng vải mềm, khô. Không sử dụng hóa chất mạnh hoặc dung môi.
• Store the device in a cool, dry place away from direct sunlight and excessive heat.
• Protect the hotshoe contacts from dust and damage.
• The X2T-S uses a USB-C connection for firmware updates, which is more reliable than MicroUSB. Keep the port clean.

Xử lý sự cố

• Flash not triggering:
  • Ensure both the X2T-S and the flash unit(s) are powered on.
  • Verify that the channels and wireless IDs on the transmitter and receiver (flash unit) are identical.
  • Kiểm tra mức pin trên cả hai thiết bị.
  • Ensure the flash unit is within the operating range (up to 100 meters).
  • Confirm the X2T-S is securely mounted on the camera's hotshoe.
  • If using multiple flashes, ensure they are assigned to the correct groups and enabled.
• Sự cố kết nối Bluetooth:
  • Make sure Bluetooth is enabled on both the X2T-S and your mobile device.
  • Restart both the X2T-S and your mobile device.
  • Ensure the GodoxPhoto app is up to date.
  • Try unpairing and re-pairing the device in your mobile device's Bluetooth settings.
• Đầu ra đèn flash không nhất quán:
  • Check for any obstructions between the transmitter and receiver.
  • Ensure the flash mode (TTL/Manual) is set correctly for your shooting scenario.
  • Verify that flash exposure compensation is not set to an unintended value.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

For information regarding warranty coverage, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official Godox webtrang web cung cấp thông tin liên hệ và tài nguyên hỗ trợ mới nhất.