1. Sản phẩm hếtview
The Braun 4189-652 Hand Blender Wire Whip is an original equipment manufacturer (OEM) authorized replacement part designed for specific Braun hand blender models. This accessory is intended for tasks such as whipping cream, beating eggs, and preparing light batters.
Khả năng tương thích: This wire whip is compatible with various Braun hand blender models, including: 4179, 4185, 4189, 4193, MR4050, and MR430. Please verify your hand blender's model number to ensure proper fit and function.
Nội dung gói hàng:
- 1 x Braun 4189-652 Wire Whip
Image 1.1: The Braun 4189-652 Hand Blender Wire Whip. This image shows the stainless steel whisk attachment designed for Braun hand blenders.
2. Hướng dẫn an toàn
Luôn tuân thủ các biện pháp phòng ngừa an toàn cơ bản khi sử dụng các thiết bị điện để giảm nguy cơ hỏa hoạn, điện giật và/hoặc thương tích cho người.
- Unplug Before Assembly: Always ensure the hand blender is unplugged from the power outlet before attaching or detaching the wire whip.
- Tránh tiếp xúc với các bộ phận chuyển động: Keep hands, hair, clothing, and other utensils away from the wire whip during operation to prevent injury.
- Sử dụng trên bề mặt ổn định: Operate the hand blender with the wire whip on a stable, dry surface.
- Do Not Immerse Motor Unit: Never immerse the motor unit of your hand blender in water or other liquids.
- Những đứa trẻ: Thiết bị này không dành cho trẻ em sử dụng. Giữ thiết bị và dây điện xa tầm tay trẻ em.
- Những phần hư hại: Do not use the wire whip if it appears damaged. Contact customer support for replacement.
3. Thiết lập và đính kèm
- Đảm bảo tắt nguồn: Make sure your Braun hand blender's motor unit is unplugged from the electrical outlet.
- Căn chỉnh và chèn: Hold the wire whip by its plastic collar. Align the top of the wire whip with the attachment port on the hand blender's motor unit. Gently push the wire whip into the port until it clicks securely into place.
- Xác minh tệp đính kèm an toàn: Give the wire whip a gentle tug to ensure it is firmly attached and will not detach during operation.
To detach the wire whip, ensure the hand blender is unplugged. Grip the wire whip firmly and pull it straight out from the motor unit.
4. Hướng dẫn vận hành
The wire whip is ideal for incorporating air into ingredients, creating light and fluffy textures.
- Chuẩn bị nguyên liệu: Place the ingredients you wish to whip (e.g., cream, egg whites) into a deep bowl or container.
- Position the Whip: With the hand blender unplugged, attach the wire whip as described in Section 3. Once attached, immerse the wire whip into the ingredients.
- Plug In and Start: Plug the hand blender into a power outlet. Select the desired speed setting on your hand blender. Start at a low speed to prevent splashing, then gradually increase the speed as needed.
- Roi da: Move the hand blender gently in a circular motion, ensuring the wire whip makes contact with all ingredients. Continue whipping until the desired consistency is achieved.
- Hoàn thành: Once done, turn off the hand blender and unplug it from the power outlet. Carefully remove the wire whip from the ingredients.
Ghi chú: Do not operate the hand blender with the wire whip in an empty bowl for extended periods, as this can cause unnecessary wear.
5. Bảo trì và vệ sinh
Proper cleaning and maintenance will extend the life of your wire whip.
- Vệ sinh ngay lập tức: After each use, unplug the hand blender and detach the wire whip. Rinse the wire whip immediately under running water to remove food residue.
- Rửa tay: Wash the wire whip by hand using warm, soapy water and a soft brush or sponge. Rinse thoroughly.
- Không an toàn cho máy rửa bát: The Braun 4189-652 Wire Whip is không an toàn với máy rửa chén. Washing it in a dishwasher may cause damage to the materials or finish.
- Sấy khô: Dry the wire whip completely before storing to prevent water spots or corrosion.
- Kho: Store the clean, dry wire whip in a safe place, away from other utensils that could bend or damage the wires.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your wire whip, refer to the following common solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Wire whip does not attach securely. | Sai lệch vị trí hoặc vật cản. | Ensure the hand blender is unplugged. Re-align the whip with the attachment port and push firmly until it clicks. Check for any food residue or debris in the port. |
| Whip is not effective. | Too little liquid, incorrect speed, or damaged wires. | Ensure sufficient liquid for whipping. Increase hand blender speed gradually. Inspect the wire whip for bent or broken wires; replace if damaged. |
| Whip is difficult to clean. | Thức ăn thừa khô bám trên bề mặt. | Clean immediately after use. Soak in warm, soapy water for a few minutes before scrubbing with a soft brush. |
7. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Mã số sản phẩm | 4189-652 |
| Thương hiệu | Braun |
| Số hiệu mẫu | 4189-652 |
| Vật liệu | Thép không gỉ |
| Kích thước sản phẩm (D x R x C) | 2"D x 2"W x 5"H |
| Tính năng đặc biệt | Detachable Attachment |
| Sử dụng được khuyến nghị | Đánh bông |
| An toàn với máy rửa chén | KHÔNG |
| Nhà sản xuất | BRAUN |
| Nước sản xuất | Hoa Kỳ |
8. Bảo hành và Hỗ trợ
As an Original Equipment Manufacturer (OEM) authorized part, the Braun 4189-652 Hand Blender Wire Whip is designed to meet the quality standards of Braun products. For specific warranty information regarding this replacement part, please refer to the warranty documentation provided with your original Braun hand blender motor unit, or contact Braun customer support directly.
For further assistance or to inquire about other Braun products, please visit the official Braun store: Cửa hàng Braun trên Amazon.
