RCF Evox 12 Portable Array Powered Active Speaker System User Manual

Giới thiệu

This manual provides essential information for the safe and efficient operation of your RCF Evox 12 Portable Array Powered Active Speaker System. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Sản phẩm trênview

The RCF EVOX 12 is a high-performance 1400-watt PA System designed for live sound applications. It features a powerful 15-inch subwoofer and a 4-inch top array, delivering balanced and clear audio. The system is built with durable components, offering a maximum Sound Pressure Level (SPL) of 130dB. Integrated Digital Signal Processing (DSP) optimizes sound performance. Its design includes built-in wheels and a handle for enhanced portability, making it suitable for small to medium-sized event environments.

Hình ảnh: Mặt trước view of the RCF Evox 12 Portable Array Powered Active Speaker System, showcasing the subwoofer unit with the RCF logo and the speaker grille.

Có gì trong hộp

Upon unpacking, verify that all listed components are present and in good condition:

1 x EVOX 12 Subwoofer Unit
1 x EVOX 12 Column Array (Top Speaker)
1 x Speaker Pole for mounting the column array
1 x Bộ đổi nguồn
2 x RCF Bags (for transport and protection)
1 x Hướng dẫn sử dụng (tài liệu này)

Hướng dẫn thiết lập

Vị trí: Position the EVOX 12 subwoofer on a stable, flat surface. Ensure adequate ventilation around the unit.
Mounting the Column Array: Insert the speaker pole into the designated pole mount on top of the subwoofer unit. Secure the pole firmly. Carefully attach the column array speaker to the top of the speaker pole. Ensure it is stable and locked into place.
Kết nối nguồn điện: Connect the power adaptor to the EVOX 12 subwoofer's power input and then to a suitable AC power outlet.
Đầu vào âm thanh: Connect your audio source (mixer, instrument, microphone) to the XLR input connectors on the subwoofer unit. The EVOX 12 supports XLR connectivity.
Bật nguồn hệ thống: Before powering on, ensure all volume controls are set to minimum. Power on your audio source devices first, then power on the EVOX 12 system.

Hướng dẫn sử dụng

Kiểm soát âm lượng: Gradually increase the master volume control on the EVOX 12 subwoofer to the desired listening level. Adjust individual input levels on your audio source as needed.
Cài đặt trước DSP: The EVOX 12 features onboard DSP. Refer to the control panel for available presets (e.g., Flat, Boost, Playback, Club) and select the one that best suits your application and environment.
Độ lợi đầu vào: Adjust the input gain for each connected source to prevent clipping and ensure optimal signal-to-noise ratio.
Trình tự tắt nguồn: When finished, first turn down the master volume on the EVOX 12, then power off the system, followed by your audio source devices.

BẢO TRÌ

Vệ sinh: Use a soft, dry cloth to clean the exterior surfaces of the speaker system. Avoid using abrasive cleaners or solvents.
Kho: When not in use, store the EVOX 12 in a dry, cool environment, preferably in its protective bags, to prevent dust accumulation and physical damage.
Quản lý cáp: Ensure all cables are properly coiled and secured during transport and storage to prevent damage.
Điều tra: Periodically inspect cables, connectors, and the speaker pole for any signs of wear or damage. Replace damaged components immediately.

Xử lý sự cố

Vấn đề	Nguyên nhân có thể	Giải pháp
Không có âm thanh phát ra	Nguồn không được kết nối hoặc bật Volume controls set to minimum Audio source not connected or active Cáp bị lỗi	Kiểm tra kết nối nguồn và công tắc Increase master volume and input gains Verify audio source is on and connected Test with different cables
Âm thanh bị méo	Tín hiệu đầu vào quá cao (bị méo tiếng) Loa bị quá tải Incorrect DSP setting	Reduce input gain on audio source or EVOX 12 Lower overall volume Select an appropriate DSP preset
Hệ thống không bật nguồn	Power cable loose or damaged Không có điện từ ổ cắm	Check power cable connections Kiểm tra ổ cắm bằng thiết bị khác

Thông số kỹ thuật

Thương hiệu	RCF
Số hiệu mẫu	EVOX12
Công suất đầu ra tối đa của loa	1400 Watt
Signal-to-Noise Ratio (SPL)	130 dB
Đường kính loa siêu trầm	15 inch
Đường kính loa tweeter	1 inch
Công nghệ kết nối	XLR (Wired)
Chế độ đầu ra âm thanh	Âm thanh nổi
Kiểu lắp đặt	Đứng tự do, gắn bánh xe
Các tính năng bổ sung	Portable, Onboard DSP
Nguồn điện	Điện có dây
Sử dụng cụ thể	Events and Performances
Màu sắc	Đen
Mức độ chống nước	Không chống nước

Bảo hành và Hỗ trợ

The RCF Evox 12 Portable Array Powered Active Speaker System comes with a Bảo hành có giới hạn 90 ngày. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact RCF customer service or your authorized dealer. Keep your proof of purchase for warranty validation.

For further assistance, you may visit the official RCF website or consult their online resources for FAQs and additional support documentation.

	Hướng dẫn sử dụng hệ thống loa mảng hai chiều chủ động chuyên nghiệp RCF EVOX 12. Sách hướng dẫn sử dụng toàn diện dành cho hệ thống âm thanh di động RCF EVOX 12, nêu chi tiết các biện pháp an toàn, mô tả sản phẩm, hướng dẫn lắp đặt, kết nối bảng điều khiển phía sau, thông số kỹ thuật và kích thước.
	RCF EVOX 5 & EVOX 8 Owner Manual: Professional Active Two-Way Arrays Download the RCF EVOX 5 and EVOX 8 owner manual. This guide provides detailed information on installation, safety precautions, connections, specifications, and operation of these professional active two-way array loudspeaker systems.
	RCF EVOX J11 アクティブ3ウェイシステムユーザーマニュアル RCF EVOX J11 アクティブ3ウェイシステムのユーザーマニュアル。製品の設置、接続、操作方法、トラブルシューティング、および仕様について詳しく説明しています。
	RCF EVOX J9 Active 3-Way System User Manual Comprehensive user manual for the RCF EVOX J9 active 3-way portable column system, covering safety, setup, operation, and technical specifications.
	RCF EVOX J11 Owner's Manual - High-Performance Active Three-Way Music System Discover the RCF EVOX J11, a powerful and versatile active three-way music system designed for exceptional audio performance. This manual provides essential information for setup, operation, and maintenance.
	RCF EVOX V15 Professional Three-Way Column System Discover the RCF EVOX V15, a professional three-way column loudspeaker system featuring 3500W Class-D amplification, Bass Motion Control, and FiRPHASE technology for superior sound.

RCF EVOX 12