PRV AUDIO TW700Ti

PRV AUDIO TW700Ti Black 4 Inch Titanium Bullet Tweeter

Hướng dẫn sử dụng

1. Sản phẩm hếtview

The PRV AUDIO TW700Ti is a 4-inch titanium bullet tweeter designed to enhance the high-frequency performance of car audio and professional loudspeaker systems. It features a robust titanium diaphragm, a double magnet structure for high sensitivity and low distortion, and a built-in capacitor to limit low frequencies and improve sound clarity. This tweeter is engineered for efficiency and delivers a frequency response up to 20,000 Hz with a sensitivity of 107 dB at 1W/1m.

PRV AUDIO TW700Ti Black 4 Inch Titanium Bullet Tweeter with included capacitor.

Figure 1: PRV AUDIO TW700Ti Black 4 Inch Titanium Bullet Tweeter with included capacitor.

2. Thiết lập và Cài đặt

Proper installation is crucial for optimal performance and longevity of your PRV AUDIO TW700Ti tweeter. Ensure all connections are secure and correctly polarized.

2.1 Tháo dỡ

Carefully remove the tweeter from its packaging. Verify that all components, including the tweeter and the pre-installed capacitor, are present and undamaged.

2.2 Những cân nhắc khi lắp đặt

The TW700Ti features a compact design with a mounting depth of 2.55 inches and flat sides, allowing for close side-by-side mounting if desired. The mounting cutout diameter is 3.58 inches. Choose a mounting location that provides adequate space and structural integrity.

Diagram illustrating the overall size, mounting depth, and mounting cutout diameter of the PRV AUDIO TW700Ti tweeter.

Figure 2: Dimensions of the PRV AUDIO TW700Ti tweeter.

2.3 Đấu dây

The tweeter operates at 8 Ohms impedance and includes a built-in polyester metalized film capacitor. This capacitor acts as a high-pass filter, protecting the tweeter by limiting low frequencies. Connect the tweeter to your amplifier or crossover network, ensuring correct polarity (positive to positive, negative to negative). Incorrect wiring can lead to phase issues and reduced sound quality.

Cận cảnh view of the PRV AUDIO TW700Ti tweeter, highlighting the included capacitor for frequency limiting.

Figure 3: Tweeter with pre-installed capacitor.

3. Hoạt động

Once installed, the PRV AUDIO TW700Ti tweeter is designed to integrate seamlessly into your audio system, providing clear and brilliant high-frequency sound.

3.1 Xử lý nguồn điện

The tweeter has a maximum output power of 480 Watts. Ensure your amplifier's output power is within the recommended range to prevent damage to the tweeter. The built-in capacitor helps manage the frequency range, but proper gain stagđang ở trên của bạn amplifier is still important.

3.2 Điều chỉnh âm thanh

For optimal sound, you may need to adjust the high-frequency settings on your car audio head unit or external equalizer. Start with flat settings and make small adjustments to achieve the desired balance with your other speakers.

4. Bảo trì

The PRV AUDIO TW700Ti tweeter requires minimal maintenance to ensure long-lasting performance.

  • Vệ sinh: Use a soft, dry cloth to gently wipe the tweeter's surface. Avoid using harsh chemicals or abrasive materials, which can damage the finish or diaphragm.
  • Điều tra: Periodically check wiring connections to ensure they remain secure. Inspect the tweeter for any signs of physical damage.
  • Môi trường: Avoid exposing the tweeter to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your PRV AUDIO TW700Ti tweeter, refer to the following common troubleshooting steps:

Vấn đềNguyên nhân có thểGiải pháp
Không có âm thanh từ loa tweeter
  • Dây điện lỏng lẻo hoặc không đúng
  • Ampmáy lọc không được cấp nguồn hoặc bị lỗi
  • Cài đặt chéo không chính xác
  • Loa tweeter bị hỏng
  • Check all wiring connections for proper polarity and tightness.
  • Xác minh amplifier đang bật và đang hoạt động.
  • Ensure high-pass filter is set correctly (if using external crossover).
  • Test with another known-good tweeter or contact support.
Âm thanh bị méo hoặc chói tai
  • Áp đảo loa tweeter
  • Cài đặt mức tăng không chính xác trên ampngười nói dối
  • Nguồn âm thanh chất lượng kém
  • Tweeter damage
  • Giảm bớt ampTăng âm lượng hoặc độ khuếch đại của bộ khuếch đại.
  • Adjust equalizer settings to reduce excessive high frequencies.
  • Kiểm tra bằng nguồn âm thanh khác.
  • Inspect tweeter for physical damage.
Tiếng rít
  • Excessive gain or high-frequency boost
  • Nhiễu vòng đất
  • Reduce high-frequency settings on your receiver/equalizer.
  • Kiểm tra xem tất cả các thiết bị âm thanh đã được nối đất đúng cách chưa.

6. Thông số kỹ thuật

Detailed technical specifications for the PRV AUDIO TW700Ti Black 4 Inch Titanium Bullet Tweeter:

  • Tên mẫu: TW700Ti BLACK
  • Loại loa: Người dùng Twitter
  • Kiểu lắp đặt: Giá đỡ xe hơi
  • Vật liệu: Titanium, Metal/Plastic
  • Màu sắc: Đen
  • Trở kháng: 8 Ohm
  • Kích thước loa: 4 inch
  • Đường kính loa tweeter: 1.5 inch
  • Công suất đầu ra tối đa của loa: 480 Watt
  • Đáp ứng tần số: 1 KHz - 20 KHz (up to 20,000 Hz)
  • Độ nhạy: 107 dB ở 1W/1m
  • Kích thước sản phẩm: 2.97"D x 4.05"W x 4.05"H
  • Trọng lượng sản phẩm: 3.48 Bảng Anh
  • Các thành phần bao gồm: 1x TW700Ti Black Tweeter (with built-in capacitor)
  • Công nghệ kết nối: Có dây
  • Công dụng được khuyến nghị cho sản phẩm: For Music Players, Upgrading car audio systems
  • Nhà sản xuất: PRV AUDIO
  • UPC: 799928735070

7. Bảo hành và Hỗ trợ

7.1 Thông tin bảo hành

The PRV AUDIO TW700Ti tweeter comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation included with your purchase or visit the official PRV AUDIO webđịa điểm.

7.2 Hỗ trợ khách hàng

If you require technical assistance, have questions about installation, or need to report a defect, please contact PRV AUDIO customer support. Contact information can typically be found on the product packaging or the official PRV AUDIO webđịa điểm.

© 2026 PRV AUDIO. Mọi quyền được bảo lưu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.