Chuango PIR-926 Passive Outdoor Solar Infrared Motion Sensor User Manual

1. Giới thiệu

The Chuango PIR-926 is an advanced passive infrared (PIR) motion sensor designed for outdoor security applications. It features patented infrared technology, fuzzy logic, and a sophisticated algorithm to accurately detect human body movements while effectively reducing interference and false alarms. Its dual detection capability, combining infrared and microwave sensing, enhances reliability. Equipped with a solar panel and a waterproof housing, this sensor is ideal for various outdoor environments.

Figure 1: Chuango PIR-926 Motion Sensor Overview

2. Tính năng sản phẩm

• Improved detection algorithm, preventing false alarms through integrated infrared and microwave sensors.
• Built-in solar charger and waterproof housing, making it suitable for outdoor installation.
• Wide detection range: 8 meters with a 110-degree angle.
• Powered by a rechargeable lithium battery: 3.7 V, 1800 mAh.
• Extended standby time of up to 150 days.
• Compact detector dimensions: 186 x 200 x 125 mm (L x W x H).
• Effective frequency range: up to 80 meters in open areas.

3. Thành phần trênview

Familiarize yourself with the main components of the PIR-926 motion sensor before installation.

Figure 2: Sensor Components. Includes Solar Panel, Fixing Screw, LED Indicator, Fresnel Lens, Detector, Base, and Wall Bracket.

• Tấm pin mặt trời: Sạc pin bên trong.
• Đèn báo LED: Cung cấp phản hồi về trạng thái.
• Ống kính Fresnel: Focuses infrared radiation for detection.
• Máy dò: Main sensing unit.
• Căn cứ: Connects the detector to the mounting bracket.
• Fixing Screw: Secures the sensor to the bracket.
• Giá đỡ tường: Used for mounting the sensor to a wall or surface.

4. Thiết lập và Cài đặt

Proper installation is crucial for optimal performance and to minimize false alarms. Follow these steps carefully:

4.1 Lắp trên tường

1. Select a suitable location on a wall, ensuring it is within the desired detection area and receives adequate sunlight for the solar panel.
2. Secure the wall bracket to the chosen surface using appropriate screws and anchors.
3. Attach the sensor unit to the wall bracket, ensuring it is firmly connected and can be adjusted for optimal angle.

Figure 3: Wall Mounting Procedure. The sensor attaches to a bracket secured to the wall.

4.2 Optimal Placement Guidelines

To ensure accurate detection and prevent false alarms, adhere to the following placement recommendations:

• Chiều cao lắp đặt: Install the sensor at approximately 2 meters (6.5 feet) from the ground for optimal detection coverage.
• Khu vực phát hiện: Position the sensor to cover the desired area, typically up to 8 meters with a 110-degree angle. Ensure the detection path is clear of obstructions.
• Tiếp xúc với ánh sáng mặt trời: Mount the sensor in a location that receives direct sunlight for several hours a day to ensure the solar panel can effectively charge the internal battery.
• Tránh chướng ngại vật: Do not install the sensor where large objects like trees, bushes, or structures might block its field of view or cause false triggers due to movement.
• Miễn dịch vật nuôi: While the sensor has advanced algorithms, avoid placing it at heights or angles where pets might frequently trigger it, especially if they are large.
• No Direct Heat Sources: Avoid pointing the sensor directly at heat sources, reflective surfaces, or areas with rapid temperature changes, as this can lead to false alarms.

Figure 4: Installation Best Practices. Shows correct mounting height (2m), detection pattern (8m, 110°), sunlight exposure, and incorrect placements (pets, trees, direct light/heat sources).

5. Hướng dẫn vận hành

Once installed, the PIR-926 operates automatically. The solar panel continuously charges the internal battery, ensuring continuous operation.

• Kích hoạt: The sensor is designed to be always active, detecting motion within its specified range.
• Phát hiện: When motion is detected, the sensor will trigger an alarm signal to a compatible security system. The LED indicator may flash briefly upon detection.
• Quản lý năng lượng: The integrated solar panel charges the 3.7V 1800mAh lithium battery during daylight hours. The sensor can operate for up to 150 days on standby without direct sunlight once fully charged.

6. Bảo trì

Regular maintenance ensures the longevity and reliable operation of your PIR-926 sensor.

• Tấm pin mặt trời sạch: Lau tấm pin mặt trời định kỳ bằng khăn mềm,amp Dùng khăn lau để loại bỏ bụi bẩn, mảnh vụn có thể cản trở hiệu quả sạc.
• Clean Fresnel Lens: Gently clean the Fresnel lens with a soft, dry cloth to ensure clear detection. Avoid abrasive cleaners.
• Kiểm tra lắp đặt: Ensure the sensor remains securely mounted and its angle has not shifted due to weather or external factors.
• Tuổi thọ pin: The internal lithium battery is designed for long life. If the sensor's performance degrades significantly despite adequate sunlight, the battery may need replacement by a qualified technician.

KHAI THÁC. Xử lý sự cố

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

For warranty information, technical support, or service inquiries regarding your Chuango PIR-926 motion sensor, please refer to the documentation provided at the time of purchase or visit the official Chuango webtrang web. Giữ lại biên lai mua hàng làm bằng chứng mua hàng.

For general inquiries, you may contact Chuango customer support through their official channels. Always provide your product model number (PIR-926) when seeking assistance.

Chính thức Webđịa điểm: www.chuango.com (Please note: This link is for illustrative purposes and may not be the exact support page.)