Citizen BU4005-56H

Citizen Men's Analogue Watch BU4005-56H Instruction Manual

Model: BU4005-56H

Giới thiệu

Thank you for choosing a Citizen Eco-Drive watch. This manual provides essential information for the proper setup, operation, and maintenance of your BU4005-56H analogue watch. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.

The Citizen BU4005-56H features Citizen's proprietary Eco-Drive technology, which harnesses light from any source (natural or artificial) and converts it into electrical energy to power the watch. This eliminates the need for battery replacement, offering a convenient and environmentally friendly timekeeping solution.

Cài đặt

Sạc ban đầu

Before first use, or if the watch has stopped, ensure it is fully charged. Expose the watch dial to bright light (e.g., sunlight or fluorescent lamp) for several hours. The charging time varies depending on the light source intensity. A fully charged Eco-Drive watch can run for an extended period in the dark.

Diagram illustrating how Citizen Eco-Drive technology converts light into energy to power the watch.

Image: Eco-Drive Technology - How it works. This diagram shows the watch dial absorbing light, which is converted into electrical energy and stored in a power cell, eliminating the need for battery replacement.

Thiết lập thời gian và ngày tháng

  1. Tháo vương miện ra: Nhẹ nhàng kéo núm chỉnh giờ (núm xoay bên hông đồng hồ) ra đến vị trí nấc thứ hai. Kim giây sẽ dừng lại.
  2. Đặt thời gian: Rotate the crown to set the hour and minute hands. Ensure you set the correct AM/PM by observing the date change. If the date changes around midnight, it is set to AM.
  3. Ấn vào núm vặn: Once the time is set, push the crown back into the normal position. The second hand will resume movement.
  4. Thiết lập ngày: Pull the crown out to the first click position. Rotate the crown to adjust the date. Avoid setting the date between 9:00 PM and 1:00 AM, as this may interfere with the automatic date change mechanism. Push the crown back in when finished.
Bên view of the Citizen BU4005-56H watch, showing the crown for time and date adjustment.

Hình ảnh: Bên view of the watch. This image highlights the crown, which is used for setting the time and date.

Vận hành đồng hồ của bạn

Chấm công

Your Citizen BU4005-56H watch is designed for accurate timekeeping. The second hand moves in one-second intervals. The watch also features a date display.

Chống nước

Chiếc đồng hồ này có khả năng chống nước ở độ sâu 50 mét (5 ATM). Điều này có nghĩa là nó phù hợp để sử dụng hàng ngày và có thể chịu được nước bắn, mưa và ngâm nước trong thời gian ngắn. không Thích hợp để bơi lội, lặn hoặc tắm vòi sen bằng nước nóng, vì hơi nước có thể thấm qua các gioăng.

Glow In The Dark Feature

The hands and/or markers on your watch are treated with a luminous material that glows in the dark after exposure to light. The intensity and duration of the glow depend on the exposure time and intensity of the light source.

BẢO TRÌ

Vệ sinh đồng hồ của bạn

  • Vỏ và mặt kính: Lau bằng khăn mềm, khô. Đối với vết bẩn cứng đầu, hãy dùng khăn hơi ẩm.amp vải và sau đó lau khô hoàn toàn.
  • Dây đeo bằng thép không gỉ: Clean the metallic band with a soft brush and mild soapy water if necessary. Rinse thoroughly with clean water and dry completely to prevent water spots or corrosion.

Eco-Drive Charging Best Practices

  • Regularly expose your watch to light to maintain a full charge.
  • Avoid prolonged storage in dark places, as this can deplete the power reserve.
  • Do not expose the watch to extremely high temperatures during charging (e.g., direct sunlight on a car dashboard), as this can damage internal components.

Xử lý sự cố

Watch Has Stopped or Keeps Incorrect Time

  • Insufficient Charge: The most common reason for an Eco-Drive watch to stop is insufficient light exposure. Place the watch under bright light for several hours to fully charge it.
  • Time/Date Not Set Correctly: Refer to the 'Setting the Time and Date' section to ensure the watch is set accurately.
  • Vị trí vương miện: Ensure the crown is fully pushed in. If it is pulled out, the watch will not operate correctly.

Date Changes at Noon

This indicates that the AM/PM setting is incorrect. Advance the time by 12 hours (or rotate the hands past 12 o'clock once) to correct the AM/PM indication.

Thông số kỹ thuật

Tính năngChi tiết
Số hiệu mẫuBU4005-56H
Kiểu chuyển độngQuartz (Eco-Drive)
Kiểu hiển thịTương tự
Vật liệu vỏ máyThép không gỉ
Đường kính vỏ42 milimét
Độ dày vỏ12 milimét
Chất liệu dây đeoThép không gỉ
Màu sắc của dảiĐen
Độ rộng băng tần21 milimét
Màu quay sốĐen
Chất liệu pha lêKhoáng sản
Độ sâu chống nước50 mét (5 ATM)
Trọng lượng sản phẩm380 gam
Tính năng đặc biệtPhát sáng trong bóng tối
Ở phía sau view of the Citizen BU4005-56H watch, showing the case back and deployment clasp.

Hình ảnh: Phía sau view of the watch. This image displays the stainless steel case back and the push-button deployment clasp on the metallic strap.

Bảo hành và Hỗ trợ

Thông tin bảo hành

Your Citizen BU4005-56H watch comes with a 1 Year International Guarantee. Please refer to the warranty card included with your purchase for full terms and conditions. Keep your proof of purchase for warranty claims.

Hỗ trợ khách hàng

For any questions, service, or repair needs not covered in this manual, please contact Citizen customer support or visit an authorized Citizen service center. Contact information can typically be found on the official Citizen webhoặc tài liệu bảo hành của bạn.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.