Giới thiệu
This manual provides essential information for the safe and effective use of your Philips 17W 24in T8 Bright White Fluorescent Tube, Model 280909. Please read these instructions carefully before installation and retain them for future reference.
Thông tin an toàn
- Nguy cơ điện: Always disconnect power to the fixture before installing, removing, or servicing the fluorescent tube. Failure to do so may result in electric shock or injury.
- Fragile Item: Fluorescent tubes are made of glass and can break. Handle with care to prevent injury.
- Hàm lượng thủy ngân: This product contains mercury. Dispose of in accordance with local, state, and federal laws. Visit www.epa.gov/mercury để biết thêm thông tin.
- Khả năng tương thích: Ensure the fluorescent tube is compatible with your fixture's ballast and socket type (G13 Medium Bi-Pin).
- Chỉ sử dụng trong nhà: Bóng đèn này được thiết kế để sử dụng trong nhà.
Sản phẩm trênview
The Philips 17W 24in T8 Bright White Fluorescent Tube is designed to provide efficient and bright illumination. It features a T8 bulb shape and a G13 (Medium Bi-Pin) base for standard fluorescent fixtures.
Figure 1: Philips 17W 24in T8 Bright White Fluorescent Tube. This image shows the cylindrical glass tube with bi-pin connectors at each end.
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Thương hiệu | Philips |
| Số hiệu mẫu | 280909 |
| Cái gì?tage | 17 Watt |
| Kích thước hình dạng bóng đèn | T8 |
| Đế bóng đèn | G13 (Chân kép cỡ trung bình) |
| Màu sáng | Trắng sáng |
| Nhiệt độ màu | 5000 độ Kelvin |
| Độ sáng | 1300 Lumen |
| Chỉ số hoàn màu (CRI) | 82 |
| Tậptage | 240 Vôn (AC) |
| Chiều dài | 24 inch |
| Đường kính | 1 inch |
| Tuổi thọ ước tính | 24,000 hours (approx. 22.2 years based on 3 hrs/day) |
| Sử dụng trong nhà/ngoài trời | Trong nhà |
Thiết lập và cài đặt
- Ngắt kết nối nguồn: Before beginning installation, ensure the power supply to the fluorescent light fixture is completely turned off at the circuit breaker or fuse box.
- Remove Old Tube (if applicable): If replacing an existing tube, carefully twist the old tube approximately 90 degrees and gently pull it out of the sockets. Dispose of the old tube properly according to local regulations.
- Kiểm tra đồ đạc: Check the fixture's sockets and wiring for any damage. Ensure the ballast is compatible with T8 fluorescent tubes.
- Lắp đặt ống mới: Align the two pins at each end of the Philips T8 fluorescent tube with the slots in the fixture's sockets. Gently push the tube into the sockets until it is fully seated, then twist it approximately 90 degrees until it locks into place. Do not force the tube.
- Khôi phục điện: Once the tube is securely installed, restore power to the fixture from the circuit breaker.
- Bài kiểm tra: Bật công tắc đèn để xác nhận thiết bị hoạt động bình thường.
If the tube does not light, ensure it is properly seated and twisted into the sockets. If issues persist, refer to the Troubleshooting section.
Hướng dẫn sử dụng
Operating the Philips T8 fluorescent tube is straightforward. Once installed in a compatible fixture with power restored, simply use the fixture's wall switch or integrated switch to turn the light on and off.
- Bật ngay lập tức: This fluorescent tube is designed for quick illumination.
- Hiệu suất tối ưu: For optimal performance and lifespan, avoid frequent on/off cycling.
BẢO TRÌ
- Vệ sinh: To clean the fluorescent tube, ensure the power is off and the tube is cool. Gently wipe the tube with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the tube.
- Thay thế: Replace the tube when it reaches the end of its life (indicated by flickering, dimming, or failure to light). Follow the installation instructions in reverse to remove the old tube and install a new one.
- Bảo trì đồ đạc: Periodically inspect the light fixture for dust accumulation, loose wiring, or damaged sockets. Clean the fixture as needed.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Tube does not light |
|
|
| Tube flickers |
|
|
| Đầu ra ánh sáng mờ |
|
|
Thông tin xử lý
This fluorescent tube contains a small amount of mercury. It is important to dispose of it responsibly to protect the environment. Do not dispose of fluorescent tubes in regular household trash.
- Tái chế: Many communities offer recycling programs for fluorescent bulbs. Check with your local waste management authority for recycling options in your area.
- Hazardous Waste Facilities: Some areas require fluorescent bulbs to be taken to special household hazardous waste collection sites.
- For more information on mercury-containing products and disposal, please visit the U.S. Environmental Protection Agency (EPA) webđịa điểm: www.epa.gov/mercury.
Bảo hành và Hỗ trợ
For warranty information and customer support regarding your Philips fluorescent tube, please refer to the documentation provided with your purchase or visit the official Philips lighting website. Philips products are designed for quality and reliability.
Contact Philips: For technical assistance or product inquiries, please visit www.lighting.philips.com Hoặc tham khảo thông tin liên hệ được cung cấp trên bao bì sản phẩm.