1. Thông tin an toàn quan trọng
Always observe basic safety precautions when installing, operating, and maintaining electrical equipment. Failure to do so may result in electric shock, fire, or serious injury.
- Hãy đảm bảo ngắt nguồn điện trước khi tiến hành bất kỳ công việc lắp đặt hoặc bảo trì nào.
- This device operates on 230 V AC 50/60 Hz. Verify your electrical system's compatibility.
- Không để lộ lamp to water or excessive humidity.
- Không được phép cố gắng mở hoặc sửa đổi lamp or its components. Refer all servicing to qualified personnel.
- Để xa tầm tay trẻ em.
2. Sản phẩm hếtview và các thành phần
The Gewiss GW30501 is a removable anti-blackout lamp designed to provide emergency lighting during power outages. It features a white LED lamp and an internal Ni-Mh battery for autonomous operation.
An image showing the compact design of the Gewiss GW30501 removable anti-blackout lamp, suitable for wall mounting.
Nội dung gói hàng:
- 1 x Gewiss GW30501 Removable Anti-Blackout Lamp
- Integrated Ni-Mh Power Batteries
3. Thiết lập và Cài đặt
The GW30501 lamp is designed for wall mounting and integrates into a 2-module Playbus system.
Các bước cài đặt:
- Ngắt nguồn: Before beginning installation, ensure the main power supply to the installation area is completely disconnected at the circuit breaker.
- Chuẩn bị vị trí lắp đặt: Identify a suitable wall location within your electrical system's 2-module Playbus slot.
- Kết nối dây: Cẩn thận kết nối lamp's electrical wiring to the 230 V AC, 50/60 Hz power supply terminals within the Playbus module. Ensure correct polarity and secure connections.
- Gắn chữ Lamp: Securely insert the lamp into the 2-module Playbus slot on the wall. Ensure it is firmly seated.
- Mức phí ban đầu: Once installed, restore power. The lamp's internal Ni-Mh battery will begin charging. Allow at least 12-24 hours for the initial full charge to ensure optimal autonomy.
4. Hướng dẫn vận hành
The Gewiss GW30501 lamp offers both automatic emergency lighting and a removable portable light function.
Automatic Anti-Blackout Function:
- When installed and connected to the main power supply, the lamp's battery remains charged.
- In the event of a power failure (blackout), the lamp will automatically illuminate using its internal battery, providing emergency lighting for up to 2 hours.
- Once main power is restored, the lamp will turn off (if not manually activated) and begin recharging its battery.
Có thể tháo rời Lamp Chức năng:
- Cái lamp can be easily removed from its wall-mounted base.
- Để kích hoạt lamp when removed, gently touch the designated activation area (Touch-activated style). The white LED will illuminate.
- Để tắt lamp, touch the activation area again.
- Khi lamp is reinserted into its wall base, it will resume its automatic anti-blackout function and recharge its battery.
5. Bảo trì
Regular maintenance ensures the longevity and optimal performance of your anti-blackout lamp.
Chăm sóc pin:
- The integrated Ni-Mh battery is designed for long life. To maintain its capacity, ensure the lamp is regularly connected to power to allow for charging cycles.
- Nếu lamp is stored for an extended period, fully charge it before storage and recharge every 3-6 months to prevent deep discharge.
Vệ sinh:
- Làm sạch lamp's exterior with a soft, dry cloth.
- Không sử dụng chất tẩy rửa có tính mài mòn, dung môi hoặc hóa chất mạnh vì chúng có thể làm hỏng lớp hoàn thiện.
Kiểm tra chức năng:
- Periodically test the anti-blackout function by temporarily cutting power to the circuit the lamp is connected to. The lamp nên chiếu sáng.
- Test the removable lamp function by removing it from the base and activating it via touch.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your Gewiss GW30501 lamp, tham khảo các vấn đề và giải pháp phổ biến sau đây:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Lamp does not light up during a power outage. | Battery not charged or faulty. No power to the base. | Đảm bảo lamp has been connected to power for at least 24 hours. Check the circuit breaker for the lamp's power supply. If issues persist, contact support. |
| Có thể tháo rờiamp does not turn on when touched. | Battery low or discharged. Faulty touch sensor. | trả lại tôiamp to its base for charging. Ensure the touch area is clean and dry. |
| Short autonomy (less than 2 hours). | Pin chưa được sạc đầy hoặc pin đã cũ. | Allow for a full 24-hour charge. If the lamp is old, battery capacity may naturally decrease over time. |
| Lamp nhấp nháy hoặc mờ dần. | Low battery. Loose connection. | Đảm bảo lamp is fully charged. Check the electrical connections at the wall base (with power disconnected). |
If these solutions do not resolve the issue, please contact Gewiss customer support or a qualified electrician.
7. Thông số kỹ thuật
Detailed specifications for the Gewiss GW30501 Removable Anti-Blackout Lamp:
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Số hiệu mẫu | GW30501 |
| Thương hiệu | Gewiss |
| Nguồn cung cấp Voltage | 230 V xoay chiều, 50/60 Hz |
| Tự chủ | 2 giờ |
| Lamp Kiểu | Đèn LED trắng |
| Loại pin | Ni-Mh (included) |
| Number of Modules (Playbus) | 2 |
| Kích thước (D x R x C) | 6.5 x 5 x 5cm |
| Cân nặng | 9.07 gram |
| Vật liệu | Kim loại |
| Màu sắc | Xám |
| Loại cài đặt | Lắp tường |
| Chuyển kiểu | Kích hoạt bằng cảm ứng |
| Sử dụng cụ thể | For use during power outages or emergencies |
8. Bảo hành và Hỗ trợ
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your retailer or the manufacturer directly.
Nhà sản xuất: Gewiss
Please have your model number (GW30501) and purchase details available when contacting support.