Schellenberg 20005 2-Gang Flush-Mounted Cover Frame

Sản phẩm trênview

The Schellenberg 20005 is a white, 2-gang flush-mounted cover frame designed for electrical installations. It serves as a replacement for worn or damaged frame systems, providing a clean and finished look for your switches or timer units.

Các tính năng chính bao gồm:

• Designed for replacing worn frame systems.
• Features a 2-gang configuration.
• Kích thước: 80 x 147 x 8 mm.
• Color: White.

Hướng dẫn an toàn

Please read these safety instructions carefully before installation and use. Improper installation can lead to electrical shock or damage to the product and connected devices.

• Always disconnect power to the circuit at the main breaker before performing any electrical work.
• Nếu bạn không chắc chắn về bất kỳ phần nào của quá trình lắp đặt, hãy tham khảo ý kiến ​​của thợ điện có trình độ.
• Do not use the cover frame if it is damaged.
• Để xa tầm tay trẻ em.
• Sản phẩm này chỉ được sử dụng trong nhà.

Nội dung sản phẩm

The package for the Schellenberg 20005 2-gang flush-mounted cover frame typically includes:

• 1 x Schellenberg 2-gang flush-mounted cover frame (Model 20005)

Thiết lập và cài đặt

The Schellenberg 20005 cover frame is designed for screw-in installation, typically over existing flush-mounted electrical boxes and devices.

1. Sự chuẩn bị: Ensure the power supply to the relevant circuit is turned off at the main breaker. Verify with a voltage thử nghiệm.
2. Remove Old Frame (if applicable): Carefully remove the existing cover frame and any associated components.
3. Cài đặt thiết bị: Mount your electrical device (e.g., switch, timer) into the flush-mounted box according to its specific instructions. Ensure it is securely fastened.
4. Attach Cover Frame: Align the Schellenberg 20005 cover frame over the installed device and the flush-mounted box. The frame is designed to be screwed into place, typically using screws provided with the electrical device or the flush-mounted box itself. Ensure the frame sits flush against the wall.
5. Kiểm tra cuối cùng: Once the frame is securely installed, restore power to the circuit. Test the functionality of the installed electrical device.

Hoạt động

The Schellenberg 20005 cover frame is a passive component designed to provide an aesthetic finish for electrical devices. It does not have any operational functions itself. The operation of the electrical device (e.g., switch, timer) installed within the frame is independent of the cover frame.

BẢO TRÌ

To maintain the appearance of your Schellenberg 20005 cover frame:

• Vệ sinh thường xuyên bằng khăn mềm,amp vải.
• Tránh sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi, vì chúng có thể làm hỏng lớp phủ bề mặt.
• Ensure no liquids enter the electrical components during cleaning.

Xử lý sự cố

If you encounter issues with the Schellenberg 20005 cover frame, consider the following:

Frame Does Not Fit Device

The Schellenberg 20005 2-gang cover frame has internal openings measuring approximately 64x64mm per gang. It is important to verify the dimensions of your electrical device before purchase to ensure compatibility.

Ghi chú: This frame has been reported by some users as not being compatible with certain Schellenberg timer switches (e.g., models requiring 50x50mm openings) due to differing internal dimensions or the thickness of the device's mounting base. Always check the required frame opening size for your specific device.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

For information regarding warranty, returns, or technical support, please refer to the official Schellenberg webtrang web hoặc liên hệ trực tiếp với bộ phận chăm sóc khách hàng. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng.

You can visit the Schellenberg store for more products and information: Schellenberg Store