Schellenberg Gurtfix 44302 Roller Shutter Belt Repair Kit

1. Giới thiệu

The Schellenberg Gurtfix 44302 Roller Shutter Belt Repair Kit provides a practical solution for replacing worn, dirty, or damaged roller shutter belts. This kit allows for belt replacement without the need to open the roller shutter housing, simplifying the repair process. It is designed for mini roller shutter systems with a belt width of 14 mm.

Hình 1: Hếtview of the Schellenberg Gurtfix 44302 Roller Shutter Belt Repair Kit. This image shows the new roller shutter strap, the metal connecting plate, and other small components included in the kit.

2. Thông tin an toàn

• Read all instructions carefully before beginning the repair process.
• Ensure the roller shutter is in a stable position and cannot accidentally move during the repair.
• Nếu cần thiết, hãy đeo thiết bị bảo hộ cá nhân phù hợp, chẳng hạn như găng tay.
• Giữ tất cả các thành phần ngoài tầm với của trẻ em.
• Nếu bạn không chắc chắn về bất kỳ bước nào, hãy tham khảo ý kiến ​​chuyên gia có trình độ.

3. Nội dung gói hàng

Verify that all the following components are included in your Schellenberg Gurtfix 44302 kit:

• 1 x Roller Shutter Strap (14 mm width, 4.3 m length, gray)
• 1 x Stainless Steel Strip (connecting plate)
• 2 x Rivets
• 2 x Rivet Heads
• 1 x Strip of Tape in Belt Colour
• 1 x Pin for Punching
• 1 x Yellow Mounting Aid
• 1 x Mounting Aid (printed on the back of the packaging)

Image 2: All individual components of the Gurtfix repair kit. This image displays the new strap rolled up, the yellow mounting aid, the punching pin, the rivets, and the metal connecting strip.

4. Cài đặt và vận hành

This section details the steps to replace your roller shutter belt using the Gurtfix kit. The process is designed to be performed without opening the roller shutter box.

4.1. Chuẩn bị

1. Lower the Roller Shutter: Fully lower the roller shutter so that the entire length of the old belt is accessible from the winder.
2. Cut the Old Belt: Carefully cut the old, worn roller shutter belt approximately 10-15 cm (4-6 inches) above the winder mechanism. Ensure you leave enough of the old belt to work with.
3. Prepare the New Belt: Unroll the new Schellenberg Gurtfix belt.

4.2. Connecting the Belts

4. Attach the Stainless Steel Strip: Take the stainless steel strip and the two rivets. Position the end of the mới roller shutter belt over one end of the stainless steel strip. Use the punching pin to create holes through the belt and secure it to the strip with the rivets and rivet heads. Ensure a firm connection.
5. Connect to Old Belt: Now, take the remaining end of the cũ roller shutter belt. Overlap it with the other end of the stainless steel strip, ensuring the new belt is aligned to be pulled upwards. Secure the old belt to the stainless steel strip using the remaining rivets and rivet heads. The yellow mounting aid can assist in holding the belt sections in place during this step.
6. Reinforce Connection (Optional): For added security, you may use the provided strip of tape in belt color to wrap around the connection point, ensuring a smooth transition and preventing snagging.

4.3. Feeding the New Belt

7. Cố gắng vượt qua: Slowly and carefully pull the old roller shutter belt upwards from the winder side. This action will draw the connected new belt through the roller shutter guide and into the roller shutter box. Guide the belt smoothly to prevent it from twisting or getting stuck.
8. Theo dõi tiến trình: Continue pulling until the entire new belt has passed through the guide and is accessible at the winder opening.

4.4. Cài đặt cuối cùng

9. Detach Old Belt: Once the new belt is fully through, detach the old belt section from the stainless steel strip.
10. Attach to Winder: Secure the end of the new roller shutter belt to the roller shutter winder mechanism according to the winder's specific instructions. Ensure it is wound correctly and securely.
11. Attach to Roller Shutter Drum: Raise the roller shutter to its highest position. Secure the other end of the new belt to the roller shutter drum inside the box. This usually involves threading it through a slot and securing it with a clip or knot, depending on your roller shutter system.
12. Chức năng kiểm tra: Slowly operate the roller shutter up and down several times to ensure the new belt runs smoothly and the shutter operates correctly.

Hình ảnh 3: Cận cảnh view of the Gurtfix kit components, including the strap, metal connector, and tools. This image provides a clearer view of the individual parts used for the connection process.

5. Bảo trì

To ensure the longevity and smooth operation of your roller shutter belt, consider the following maintenance tips:

• Kiểm tra thường xuyên: Periodically inspect the belt for any signs of wear, fraying, or damage. Early detection can prevent further issues.
• Vệ sinh: If the belt becomes dirty, gently wipe it with a damp cloth. Avoid harsh chemicals that could degrade the fabric.
• Hoạt động trơn tru: Ensure the belt runs freely in its guide. If you notice any resistance, check for obstructions or misalignment.

KHAI THÁC. Xử lý sự cố

7. Thông số kỹ thuật

• Số hiệu mẫu: 44302
• Chiều rộng vành đai: 14 mm (System MINI)
• Chiều dài dây đai: 4.3 mét (khoảng 169.29 inch)
• Màu sắc: Xám
• Chất liệu dây đeo: Vải vóc
• Vật liệu phần cứng: Thép không gỉ
• Sức chịu tải: 30 Kilôgam
• Các thành phần bao gồm: 1 roller shutter strap, 1 stainless steel strip, 2 rivets, 2 rivet heads, 1 strip of tape in belt colour, 1 pin for punching, 1 yellow mounting aid, 1 mounting aid on the back of the packaging

8. Hỗ trợ

For further assistance, technical support, or inquiries regarding the Schellenberg Gurtfix 44302 Roller Shutter Belt Repair Kit, please contact Schellenberg customer support through their official website or contact channels. Please have your model number (44302) ready when contacting support.