Giới thiệu
The Brother PT-65 P-touch Home and Hobby Labeler is a portable electronic labeling system designed for organizing various items around the home or office. This device allows users to create durable, adhesive-backed labels quickly and efficiently. It features a QWERTY keyboard for easy text input and an LCD screen for previewing labels before printing. The PT-65 utilizes M tape in 9mm or 12mm widths and offers multiple font styles, sizes, and symbols to customize labels.
Hình ảnh: Trên cùng view of the Brother PT-65 P-touch Labeler, showing the QWERTY keyboard and LCD screen.
Cài đặt
1. Lắp đặt pin
The PT-65 labeler requires six AA batteries for operation. To install the batteries:
- Locate the battery compartment on the underside of the labeler.
- Mở nắp ngăn chứa pin.
- Insert six AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Đóng chặt nắp ngăn chứa pin.
2. Tape Cartridge Installation
The labeler uses Brother M tape cartridges. To install a tape cartridge:
- Ensure the labeler is powered off.
- Open the tape compartment cover, typically located on the top or side of the device.
- Insert the M tape cartridge firmly into the compartment, ensuring it clicks into place. The tape should feed smoothly into the printing mechanism.
- Đóng nắp ngăn chứa băng.
Hình ảnh: Bên trong view of the Brother PT-65 P-touch Labeler, showing the tape cartridge correctly inserted and the battery compartment.
Hướng dẫn sử dụng
1. Bật/Tắt nguồn
Nhấn nút Quyền lực button (usually red or clearly marked) to turn the labeler on or off. The device features an auto-off function to conserve battery life.
2. Typing Text
Use the QWERTY keyboard to type the desired text for your label. The text will appear on the LCD screen. The labeler supports up to two lines of text.
3. Customizing Labels
The PT-65 offers various customization options:
- Font Styles and Sizes: Use the dedicated buttons or menu options to select from nine type styles and five type sizes.
- Biểu tượng: Access 83 built-in symbols to add to your labels.
- Framing and Underlining: Apply text framing or underlining features as needed.
- Nhiều bản sao: Print up to nine copies of the same label.
4. In nhãn
After typing and customizing your label:
- Review the text on the LCD screen to ensure accuracy.
- Nhấn nút In button. The labeler will print the label and automatically cut it.
- Gently pull the printed label from the labeler's output slot.
5. Peeling and Applying Labels
To apply the label:
- Carefully peel the backing from the adhesive side of the label.
- Dán nhãn lên bề mặt sạch và khô.
Video: Demonstration of typing text and printing a label using the Brother PT-65 P-touch Labeler.
Video: Quick demonstration of printing and peeling labels for organization with the Brother PT-65.
BẢO TRÌ
1. Replacing Tape Cartridges
When the tape in the cartridge runs out or you wish to change tape types, follow the tape cartridge installation steps outlined in the Setup section.
2. Cleaning the Labeler
Để duy trì hiệu suất tối ưu:
- Wipe the exterior of the labeler with a soft, dry cloth.
- Không sử dụng chất tẩy rửa hoặc dung môi có tính mài mòn.
- Periodically clean the print head with a cotton swab moistened with isopropyl alcohol. Ensure the labeler is off and batteries are removed before cleaning the print head.
Xử lý sự cố
- Label not printing or faint print: Check if the tape cartridge is installed correctly and if there is enough tape. Ensure batteries are not depleted. Clean the print head if necessary.
- Difficulty peeling label backing: Some users find it easier to gently bend the label lengthwise to separate the backing from the adhesive side.
- Labeler does not power on: Verify that six fresh AA batteries are correctly installed with the proper polarity.
- Thông báo lỗi trên màn hình LCD: Refer to the full user manual (link in Support section) for specific error code meanings and solutions.
Thông số kỹ thuật
| Thương hiệu | Anh trai |
| Số hiệu mẫu | PT-65 |
| Công nghệ in ấn | Nhiệt |
| Nghị quyết | 200dpi |
| Kiểu hiển thị | LCD (8-character x 1 line) |
| Bàn phím | BÀN PHÍM QWERTY |
| Chiều rộng băng tương thích | 9mm, 12mm M tapes |
| Maximum Printable Height | 6.8mm |
| Số bản sao tối đa mỗi lần in | 9 |
| Nguồn điện | 6 Pin AA (không bao gồm) |
| Trọng lượng sản phẩm | 0.05 Bảng Anh |
| Kích thước sản phẩm | 8"D x 9"W x 4"H |
| Số seri | U52657-M2J042908 |
Các tính năng chính:
- Uses nonlaminated M tapes
- Độ phân giải 200 dpi
- Bàn phím QWERTY
- Prints up to 9 copies of the same label
- Thiết kế di động
Hình ảnh: Trở lại view of the Brother PT-65 P-touch Labeler, displaying the FCC compliance information and model details.
Bảo hành và Hỗ trợ
Thông tin bảo hành
The Brother PT-65 P-touch Labeler comes with a limited warranty: Parts-1 year, Labor-90 days. Please retain your proof of purchase for warranty claims.
Tài nguyên bổ sung
- Để có hướng dẫn đầy đủ, hãy tải xuống tài liệu chính thức. Hướng dẫn sử dụng (PDF).
- Ghé thăm Cửa hàng Brother trên Amazon để biết thêm sản phẩm và hỗ trợ.